Skip to content

Data Management

Stored Waypoints

The MCDU allows the flight crew to enter and store custom waypoints.

There can be up to 99 waypoints stored. To see the stored waypoints, you need to select DATA on the MCDU and move to the second page with the lateral arrow key.

MCDU DATA INDEX 2 page

MCDU DATA Stored Waypoint

These waypoints can be used in the flight plan (MCDU F-PLN page) in the same way as any other fix by entering the fix ident.

These stored waypoints are not persisted and not stored on your PC. This is similar to the configuration of most real-world aircraft, where the waypoints will also be erased after the flight (when in the DONE phase).

The following chapters will explain how to create, use and delete these stored waypoints.

How to Create a Stored Waypoint

There are three ways to create new custom waypoints:

  1. Enter a new unique identifier into the scratchpad and insert it into the flight plan as if inserting a normal additional waypoint. This will bring up the NEW WAYPOINT page with the identifier already filled out.
  2. Press the LSK 5R (5th on the right) of NEW WAYPOINT on the STORED WAYPOINT page
  3. By directly entering the new waypoint in one of the three formats into the scratchpad on the F-PLN page and inserting it into the flight plan. In this case, the FMS will generate a default name (PBDnn, PBXnn, or LLnn, where nn is the storage number of the stored waypoint).

New Waypoint Page

MCDU DATA New Waypoint Page

Enter a unique name for your waypoint into the scratchpad and press the LSK 1L left of the IDENT field.

Here you have then 3 methods of creating a new waypoint.

Format: Latitude-Longitude (LL)

This creates a point at an exact latitude and longitude.

The format is:

<latitude>/<longitude>

  • latitude is 4 digits with one decimal digit and N or S (for Northern or Southern hemisphere)
  • longitude is 4 or 5 digits with one decimal digit and E or W (for Eastern or Western Hemisphere)

Example for LL

Example for LL

Example for LL

Detailed Format Description

Format Range Units
LAT DDMM.MB or BDDMM.M
DD is degrees DD: 0 - 90 Degrees
MM.M is minutes MM.M: 0.0 - 59.9 Minutes and tenth of minutes
B is direction B: N or S
Leading 0 may be omitted
Displayed as DDMM.MB
LONG DDDMM.MB or BDDDMM.M
DDD is degrees B: E or W
MM.M is minutes DDD: 0 - 180 Degrees
B is direction MM.M: 0.0 - 59.9 Minutes and tenth of minutes
Leading 0 may be omitted
Displayed as DDDMM.MB

Format: Place-Bearing-Distance (PBD)

This creates a point at a specified bearing and distance from another fix.

The format is:

<ident1>/<bearing>/<distance>

Example for PBD

Example for PBD

Example for PBD

Format: Place-Bearing-Place-Bearing (PBX)

This creates a point at the intersection of a line on a bearing from one fix, and a similar line on a bearing from another fix.

The format is:

<ident1>-<bearing>/<ident2>-<bearing>

Example for PBX

Example for PBX

Example for PBX

How to Use a Stored Waypoint

Stored waypoints can be added to the flight plan as any other navigation fix. Just enter the ident and press the LSK left of the place where you want to insert the waypoint.

Flight Plan with Stored Waypoints

How to Delete Stored Waypoints

You can delete a single or all stored waypoints at any time. If you try to delete any waypoints used within the FMS, the waypoint will be retained and a scratchpad message F-PLN ELEMENT RETAINED appears.

Delete a Single Stored Waypoint

Single stored waypoints can be deleted from the list of stored waypoints by calling up the stored waypoint's page and using CLR on the identifier to delete it.

MCDU DATA Stored Waypoint CLR

Delete All Stored Waypoints

To delete all stored waypoints, use the DELETE ALL option from any stored waypoint page.

MCDU DATA Stored Waypoint CLR ALL

Alternatively, you can use the MCDU DATA A/C STATUS page to delete all stored waypoints.

MCDU DATA A/C STATUS

320 Sim Pilot Video


Last update: August 14, 2023